How many IBC tanks (1,000 L) fit in a 40ft container?
IBC tanks (1,000 L) of 1,200 × 1,000 × 1,160 mm (also called IBC totes, intermediate bulk containers) in a 40-foot standard container (40GP) — inner dimensions 12,032 × 2,352 × 2,393 mm. Calculated by the Cubestow engine on 2026-09-08.
Upright, single layer (not stacked). 45% of the space used, 1 layer high, about 24,200 kg (91% of payload). Open this load in the 3D planner →
Top view — floor layer (22 on the floor)
Side view — first row along the wall (1 layer)
The answer in detail
A standard 1,000-litre IBC on its pallet base measures about 1,200 × 1,000 × 1,160 mm and weighs roughly 1,100 kg full. A full container of IBCs is limited by payload, not floor space — which the numbers here make obvious.
Twice the floor of a 20ft at the same width and height. Its rated payload is usually a little lower than a 20ft, so dense cargo often maxes out weight before space.
The simple grid estimate is 10 along the length × 2 across × 1 high = 20. The engine found 22 — 2 more than either uniform grid — by mixing orientations so that the leftover strip along the wall is used. The top view above shows the pattern.
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Upright, single layer (not stacked) (headline figure) | 22 | 1 | 45% | 24,200 kg (91% of payload) |
| IBCs stacked two high (permitted for many empty or rigid-caged IBCs) | 24 | 2 | 49% | 26,400 kg (99% of payload) |
How many 40ft containers for a given order?
| IBC tanks (1,000 L) | 10 | 25 | 50 | 100 | 250 | 500 |
|---|---|---|---|---|---|---|
| 40ft containers needed | 1 | 2 | 3 | 5 | 12 | 23 |
| Last one filled to | 45% | 14% | 27% | 55% | 36% | 73% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many IBC tanks (1,000 L) fit in a 40ft container?
22 IBC tanks (1,000 L) of 1,200 × 1,000 × 1,160 mm fit in a 40ft container (inner dimensions 12,032 × 2,352 × 2,393 mm), upright, single layer (not stacked). That uses 45% of the 67.7 m³ available and weighs about 24,200 kg.
What are the inner dimensions of a 40ft container?
Typical inner dimensions are 12,032 mm long, 2,352 mm wide and 2,393 mm high (473.7 × 92.6 × 94.2 in), giving 67.7 m³ of space and a rated payload of about 26,700 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
How much does a full load of IBC tanks (1,000 L) weigh?
22 × 1,100 kg ≈ 24,200 kg, which is 91% of the 26,700 kg payload — so this load is limited by space, not weight.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, no stacking and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.