How many 600 × 400 × 300 mm boxes fit in a 40ft container?
600 × 400 × 300 mm boxes of 600 × 400 × 300 mm (also called 60 × 40 × 30 cm cartons) in a 40-foot standard container (40GP) — inner dimensions 12,032 × 2,352 × 2,393 mm. Calculated by the Cubestow engine on 2026-09-08.
Boxes may be laid on any side. 88% of the space used, 7 layers high, about 7,452 kg (28% of payload). Open this load in the 3D planner →
Top view — floor layer (228 on the floor)
Side view — first row along the wall (7 layers)
The answer in detail
A lower Euro-modular carton — the same pallet-friendly footprint at 300 mm high, typical for bottled goods and medium consumer products.
Twice the floor of a 20ft at the same width and height. Its rated payload is usually a little lower than a 20ft, so dense cargo often maxes out weight before space.
The simple grid estimate is 20 along the length × 5 across × 7 high = 700. The engine found 828 — 128 more than either uniform grid — by mixing orientations so that the leftover strip along the wall is used and by choosing the orientation that gives the most layers. The top view above shows the pattern.
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Boxes may be laid on any side (headline figure) | 828 | 7 | 88% | 7,452 kg (28% of payload) |
| Boxes kept this-side-up (turned on the floor plane only) | 770 | 7 | 82% | 6,930 kg (26% of payload) |
How many 40ft containers for a given order?
| 600 × 400 × 300 mm boxes | 100 | 250 | 500 | 1,000 | 2,500 | 5,000 |
|---|---|---|---|---|---|---|
| 40ft containers needed | 1 | 1 | 1 | 2 | 4 | 7 |
| Last one filled to | 12% | 30% | 60% | 21% | 2% | 4% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many 600 × 400 × 300 mm boxes fit in a 40ft container?
828 600 × 400 × 300 mm boxes of 600 × 400 × 300 mm fit in a 40ft container (inner dimensions 12,032 × 2,352 × 2,393 mm), boxes may be laid on any side. That uses 88% of the 67.7 m³ available and weighs about 7,452 kg.
What are the inner dimensions of a 40ft container?
Typical inner dimensions are 12,032 mm long, 2,352 mm wide and 2,393 mm high (473.7 × 92.6 × 94.2 in), giving 67.7 m³ of space and a rated payload of about 26,700 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
How much does a full load of 600 × 400 × 300 mm boxes weigh?
828 × 9 kg ≈ 7,452 kg, which is 28% of the 26,700 kg payload — so this load is limited by space, not weight.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing all six orientations, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.