How many IBC tanks (1,000 L) fit in a 7.5 t truck?
IBC tanks (1,000 L) of 1,200 × 1,000 × 1,160 mm (also called IBC totes, intermediate bulk containers) in a 7.5-tonne box truck — inner dimensions 6,200 × 2,450 × 2,400 mm. Calculated by the Cubestow engine on 2026-09-08.
Upright, single layer (not stacked). 8% of the space used, 1 layer high, about 2,200 kg (79% of payload). Payload-limited: 12 would fit by space alone. Open this load in the 3D planner →
Top view — floor layer (2 on the floor)
Side view — first row along the wall (1 layer)
The answer in detail
A standard 1,000-litre IBC on its pallet base measures about 1,200 × 1,000 × 1,160 mm and weighs roughly 1,100 kg full. A full container of IBCs is limited by payload, not floor space — which the numbers here make obvious.
Typical 7.5 t rigid with a 6.2 m body. Payload is limited to roughly 2.8 t once the body and tail-lift are accounted for, so heavy cargo fills the weight allowance long before the space.
The simple grid estimate is 5 along the length × 2 across × 1 high = 10, or 6 × 2 × 1 = 12 with every piece turned. The engine's validated plan holds 2, below the raw grid because the payload limit cap the load.
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Upright, single layer (not stacked) (headline figure) | 2 | 1 | 8% | 2,200 kg (79% of payload) |
| IBCs stacked two high (permitted for many empty or rigid-caged IBCs) | 2 | 1 | 8% | 2,200 kg (79% of payload) |
How many 7.5 t trucks for a given order?
| IBC tanks (1,000 L) | 10 | 25 | 50 | 100 | 250 | 500 |
|---|---|---|---|---|---|---|
| 7.5 t trucks needed | 5 | 13 | 25 | 50 | 125 | 250 |
| Last one filled to | 100% | 50% | 100% | 100% | 100% | 100% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many IBC tanks (1,000 L) fit in a 7.5 t truck?
2 IBC tanks (1,000 L) of 1,200 × 1,000 × 1,160 mm fit in a 7.5 t truck (inner dimensions 6,200 × 2,450 × 2,400 mm), upright, single layer (not stacked). That uses 8% of the 36.5 m³ available and weighs about 2,200 kg.
What are the inner dimensions of a 7.5 t truck?
Typical inner dimensions are 6,200 mm long, 2,450 mm wide and 2,400 mm high (244.1 × 96.5 × 94.5 in), giving 36.5 m³ of space and a rated payload of about 2,800 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
Why does the payload limit matter for IBC tanks (1,000 L)?
Geometrically 12 IBC tanks (1,000 L) would fit, but at about 1,100 kg each the 7.5 t truck's 2,800 kg payload is reached at 2. Heavy cargo fills the weight allowance before the space.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, no stacking and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.