How many EUR pallets fit in a 40ft container?
EUR pallets of 1,200 × 800 × 1,000 mm (also called Euro pallets, EPAL pallets, 1200 × 800 pallets) in a 40-foot standard container (40GP) — inner dimensions 12,032 × 2,352 × 2,393 mm. Calculated by the Cubestow engine on 2026-09-08.
Single layer, floor-loaded (standard practice). 35% of the space used, 1 layer high, about 10,000 kg (37% of payload). Open this load in the 3D planner →
Top view — floor layer (25 on the floor)
Side view — first row along the wall (1 layer)
The answer in detail
The EUR/EPAL pallet (1,200 × 800 mm) is the standard exchange pallet in Europe. Because it is narrower than the UK/industrial pallet, containers take a mix of pallets turned lengthways and crossways.
Twice the floor of a 20ft at the same width and height. Its rated payload is usually a little lower than a 20ft, so dense cargo often maxes out weight before space.
The simple grid estimate is 10 along the length × 2 across × 1 high = 20. The engine found 25 — 5 more than either uniform grid — by mixing orientations so that the leftover strip along the wall is used. The top view above shows the pattern.
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Single layer, floor-loaded (standard practice) (headline figure) | 25 | 1 | 35% | 10,000 kg (37% of payload) |
| Double-stacked (only if each loaded pallet is at most 1,196 mm tall and rated to carry another) | 50 | 2 | 71% | 20,000 kg (75% of payload) |
How many 40ft containers for a given order?
| EUR pallets | 10 | 20 | 33 | 50 | 100 | 250 |
|---|---|---|---|---|---|---|
| 40ft containers needed | 1 | 1 | 2 | 2 | 4 | 10 |
| Last one filled to | 40% | 80% | 32% | 100% | 100% | 100% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many EUR pallets fit in a 40ft container?
25 EUR pallets of 1,200 × 800 × 1,000 mm fit in a 40ft container (inner dimensions 12,032 × 2,352 × 2,393 mm), single layer, floor-loaded (standard practice). That uses 35% of the 67.7 m³ available and weighs about 10,000 kg.
What are the inner dimensions of a 40ft container?
Typical inner dimensions are 12,032 mm long, 2,352 mm wide and 2,393 mm high (473.7 × 92.6 × 94.2 in), giving 67.7 m³ of space and a rated payload of about 26,700 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
How much does a full load of EUR pallets weigh?
25 × 400 kg ≈ 10,000 kg, which is 37% of the 26,700 kg payload — so this load is limited by space, not weight.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, no stacking and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.