How many 1 m³ crates (1 × 1 × 1 m) fit in a 40ft container?
1 m³ crates (1 × 1 × 1 m) of 1,000 × 1,000 × 1,000 mm (also called one cubic metre wooden crates) in a 40-foot standard container (40GP) — inner dimensions 12,032 × 2,352 × 2,393 mm. Calculated by the Cubestow engine on 2026-09-08.
Upright, stacked as high as the roof allows. 71% of the space used, 2 layers high, about 14,400 kg (54% of payload). Open this load in the 3D planner →
Top view — floor layer (24 on the floor)
Side view — first row along the wall (2 layers)
The answer in detail
A one-cubic-metre wooden crate at 300 kg is a useful reference unit: the count is simply how many whole metres fit along, across and up — after which the payload limit takes over.
Twice the floor of a 20ft at the same width and height. Its rated payload is usually a little lower than a 20ft, so dense cargo often maxes out weight before space.
The simple grid estimate is 12 along the length × 2 across × 2 high = 48. Here no mixed pattern beats the best uniform grid, so the engine's plan is exactly that grid (48).
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Upright, stacked as high as the roof allows (headline figure) | 48 | 2 | 71% | 14,400 kg (54% of payload) |
How many 40ft containers for a given order?
| 1 m³ crates (1 × 1 × 1 m) | 10 | 25 | 50 | 100 | 250 | 500 |
|---|---|---|---|---|---|---|
| 40ft containers needed | 1 | 1 | 2 | 3 | 6 | 11 |
| Last one filled to | 21% | 52% | 4% | 8% | 21% | 42% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many 1 m³ crates (1 × 1 × 1 m) fit in a 40ft container?
48 1 m³ crates (1 × 1 × 1 m) of 1,000 × 1,000 × 1,000 mm fit in a 40ft container (inner dimensions 12,032 × 2,352 × 2,393 mm), upright, stacked as high as the roof allows. That uses 71% of the 67.7 m³ available and weighs about 14,400 kg.
What are the inner dimensions of a 40ft container?
Typical inner dimensions are 12,032 mm long, 2,352 mm wide and 2,393 mm high (473.7 × 92.6 × 94.2 in), giving 67.7 m³ of space and a rated payload of about 26,700 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
How much does a full load of 1 m³ crates (1 × 1 × 1 m) weigh?
48 × 300 kg ≈ 14,400 kg, which is 54% of the 26,700 kg payload — so this load is limited by space, not weight.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.