Cubestow
Fit guides40ft containerBicycle boxes

How many bicycle boxes fit in a 40ft container?

Bicycle boxes of 1,400 × 220 × 800 mm (also called bike cartons) in a 40-foot standard container (40GP) — inner dimensions 12,032 × 2,352 × 2,393 mm. Calculated by the Cubestow engine on 2026-09-08.

172bicycle boxes

Upright, stacked at most 3 high. 63% of the space used, 2 layers high, about 3,096 kg (12% of payload). Open this load in the 3D planner →

172bicycle boxes
2layers
63%volume used
99%of the length used
3,096 kgtotal cargo weight
26,700 kgrated payload

Top view — floor layer (86 on the floor)

12,032 mm 2,352 mm door end →
long side along the lengthturned

Side view — first row along the wall (2 layers)

2,393 mm

The answer in detail

A standard adult bicycle carton is about 1,400 × 220 × 800 mm (bike partially disassembled) and weighs 15–20 kg. Boxes are kept upright and are typically stacked no more than three high.

Twice the floor of a 20ft at the same width and height. Its rated payload is usually a little lower than a 20ft, so dense cargo often maxes out weight before space.

The simple grid estimate is 8 along the length × 10 across × 2 high = 160. The engine found 172 — 12 more than either uniform grid — by mixing orientations so that the leftover strip along the wall is used and by choosing the orientation that gives the most layers. The top view above shows the pattern.

Variants

Loading ruleFitsLayersVolume usedTotal weight
Upright, stacked at most 3 high (headline figure)172263%3,096 kg (12% of payload)

How many 40ft containers for a given order?

Bicycle boxes102550100250500
40ft containers needed111123
Last one filled to6%15%29%58%45%91%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many bicycle boxes fit in a 40ft container?

172 bicycle boxes of 1,400 × 220 × 800 mm fit in a 40ft container (inner dimensions 12,032 × 2,352 × 2,393 mm), upright, stacked at most 3 high. That uses 63% of the 67.7 m³ available and weighs about 3,096 kg.

What are the inner dimensions of a 40ft container?

Typical inner dimensions are 12,032 mm long, 2,352 mm wide and 2,393 mm high (473.7 × 92.6 × 94.2 in), giving 67.7 m³ of space and a rated payload of about 26,700 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

How much does a full load of bicycle boxes weigh?

172 × 18 kg ≈ 3,096 kg, which is 12% of the 26,700 kg payload — so this load is limited by space, not weight.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

Bicycle boxes in other containers and trucks

Other cargo in a 40ft container

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 0.7 s of search. Real containers vary by manufacturer; measure yours for tight loads.