Cubestow
Fit guides40ft container400 × 300 × 300 mm boxes

How many 400 × 300 × 300 mm boxes fit in a 40ft container?

400 × 300 × 300 mm boxes of 400 × 300 × 300 mm (also called 40 × 30 × 30 cm cartons, quarter-Euro cartons) in a 40-foot standard container (40GP) — inner dimensions 12,032 × 2,352 × 2,393 mm. Calculated by the Cubestow engine on 2026-09-08.

1,630400 × 300 × 300 mm boxes

Boxes may be laid on any side. 87% of the space used, 11 layers high, about 9,780 kg (37% of payload). Open this load in the 3D planner →

1,630400 × 300 × 300 mm boxes
11layers
87%volume used
100%of the length used
9,780 kgtotal cargo weight
26,700 kgrated payload

Top view — floor layer (240 on the floor)

12,032 mm 2,352 mm door end →
long side along the lengthturned

Side view — first row along the wall (11 layers)

2,393 mm

The answer in detail

The 400 × 300 footprint is a quarter of a EUR pallet deck (eight per layer), which makes it a favourite e-commerce shipping carton.

Twice the floor of a 20ft at the same width and height. Its rated payload is usually a little lower than a 20ft, so dense cargo often maxes out weight before space.

The simple grid estimate is 30 along the length × 7 across × 11 high = 2,310. The engine found 1,630 — 160 more than either uniform grid — by mixing orientations so that the leftover strip along the wall is used and by choosing the orientation that gives the most layers. The top view above shows the pattern.

Variants

Loading ruleFitsLayersVolume usedTotal weight
Boxes may be laid on any side (headline figure)1,6301187%9,780 kg (37% of payload)
Boxes kept this-side-up (turned on the floor plane only)1,610786%9,660 kg (36% of payload)

How many 40ft containers for a given order?

400 × 300 × 300 mm boxes1002505001,0002,5005,000
40ft containers needed111124
Last one filled to6%15%31%61%53%7%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many 400 × 300 × 300 mm boxes fit in a 40ft container?

1,630 400 × 300 × 300 mm boxes of 400 × 300 × 300 mm fit in a 40ft container (inner dimensions 12,032 × 2,352 × 2,393 mm), boxes may be laid on any side. That uses 87% of the 67.7 m³ available and weighs about 9,780 kg.

What are the inner dimensions of a 40ft container?

Typical inner dimensions are 12,032 mm long, 2,352 mm wide and 2,393 mm high (473.7 × 92.6 × 94.2 in), giving 67.7 m³ of space and a rated payload of about 26,700 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

How much does a full load of 400 × 300 × 300 mm boxes weigh?

1,630 × 6 kg ≈ 9,780 kg, which is 37% of the 26,700 kg payload — so this load is limited by space, not weight.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing all six orientations, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

400 × 300 × 300 mm boxes in other containers and trucks

Other cargo in a 40ft container

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 1.4 s of search. Real containers vary by manufacturer; measure yours for tight loads.