Cubestow
Fit guidesLWB panel vanBicycle boxes

How many bicycle boxes fit in a LWB panel van?

Bicycle boxes of 1,400 × 220 × 800 mm (also called bike cartons) in a Long-wheelbase panel van — inner dimensions 3,700 × 1,800 × 1,900 mm. Calculated by the Cubestow engine on 2026-09-08.

40bicycle boxes

Upright, stacked at most 3 high. 78% of the space used, 2 layers high, about 720 kg (60% of payload). Open this load in the 3D planner →

40bicycle boxes
2layers
78%volume used
99%of the length used
720 kgtotal cargo weight
1,200 kgrated payload

Top view — floor layer (20 on the floor)

3,700 mm 1,800 mm door end →
long side along the lengthturned

Side view — first row along the wall (2 layers)

1,900 mm

The answer in detail

A standard adult bicycle carton is about 1,400 × 220 × 800 mm (bike partially disassembled) and weighs 15–20 kg. Boxes are kept upright and are typically stacked no more than three high.

Cargo area of a typical LWB high-roof van (Sprinter / Transit class): 3.7 m long between the bulkhead and the doors, 1.8 m wide at floor level, with wheel arches narrowing the floor to about 1.3 m in the middle — the plan here ignores the arches, so real loads may lose one row.

The simple grid estimate is 2 along the length × 8 across × 2 high = 32. The engine found 40 — 8 more than either uniform grid — by mixing orientations so that the leftover strip along the wall is used and by choosing the orientation that gives the most layers. The top view above shows the pattern.

Variants

Loading ruleFitsLayersVolume usedTotal weight
Upright, stacked at most 3 high (headline figure)40278%720 kg (60% of payload)

How many LWB panel vans for a given order?

Bicycle boxes102550100250500
LWB panel vans needed1123713
Last one filled to25%63%25%50%25%50%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many bicycle boxes fit in a LWB panel van?

40 bicycle boxes of 1,400 × 220 × 800 mm fit in a LWB panel van (inner dimensions 3,700 × 1,800 × 1,900 mm), upright, stacked at most 3 high. That uses 78% of the 12.7 m³ available and weighs about 720 kg.

What are the inner dimensions of a LWB panel van?

Typical inner dimensions are 3,700 mm long, 1,800 mm wide and 1,900 mm high (145.7 × 70.9 × 74.8 in), giving 12.7 m³ of space and a rated payload of about 1,200 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

How much does a full load of bicycle boxes weigh?

40 × 18 kg ≈ 720 kg, which is 60% of the 1,200 kg payload — so this load is limited by space, not weight.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

Bicycle boxes in other containers and trucks

Other cargo in a LWB panel van

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 0.7 s of search. Real containers vary by manufacturer; measure yours for tight loads.