Cubestow
Fit guides20ft container400 × 300 × 300 mm boxes

How many 400 × 300 × 300 mm boxes fit in a 20ft container?

400 × 300 × 300 mm boxes of 400 × 300 × 300 mm (also called 40 × 30 × 30 cm cartons, quarter-Euro cartons) in a 20-foot standard container (20GP) — inner dimensions 5,898 × 2,352 × 2,393 mm. Calculated by the Cubestow engine on 2026-09-08.

779400 × 300 × 300 mm boxes

Boxes may be laid on any side. 84% of the space used, 11 layers high, about 4,674 kg (17% of payload). Open this load in the 3D planner →

779400 × 300 × 300 mm boxes
11layers
84%volume used
97%of the length used
4,674 kgtotal cargo weight
28,200 kgrated payload

Top view — floor layer (133 on the floor)

5,898 mm 2,352 mm door end →
long side along the lengthturned

Side view — first row along the wall (11 layers)

2,393 mm

The answer in detail

The 400 × 300 footprint is a quarter of a EUR pallet deck (eight per layer), which makes it a favourite e-commerce shipping carton.

The most common dry container for smaller export loads. Inner dimensions are typical for a steel ISO 20GP; individual boxes vary by a few centimetres, and the door opening (about 2,340 × 2,280 mm) is slightly smaller than the inside.

The simple grid estimate is 14 along the length × 7 across × 11 high = 1,078. The engine found 779 — 93 more than either uniform grid — by mixing orientations so that the leftover strip along the wall is used and by choosing the orientation that gives the most layers. The top view above shows the pattern.

Variants

Loading ruleFitsLayersVolume usedTotal weight
Boxes may be laid on any side (headline figure)7791184%4,674 kg (17% of payload)
Boxes kept this-side-up (turned on the floor plane only)763783%4,578 kg (16% of payload)

How many 20ft containers for a given order?

400 × 300 × 300 mm boxes1002505001,0002,5005,000
20ft containers needed111247
Last one filled to13%32%64%28%21%42%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many 400 × 300 × 300 mm boxes fit in a 20ft container?

779 400 × 300 × 300 mm boxes of 400 × 300 × 300 mm fit in a 20ft container (inner dimensions 5,898 × 2,352 × 2,393 mm), boxes may be laid on any side. That uses 84% of the 33.2 m³ available and weighs about 4,674 kg.

What are the inner dimensions of a 20ft container?

Typical inner dimensions are 5,898 mm long, 2,352 mm wide and 2,393 mm high (232.2 × 92.6 × 94.2 in), giving 33.2 m³ of space and a rated payload of about 28,200 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

How much does a full load of 400 × 300 × 300 mm boxes weigh?

779 × 6 kg ≈ 4,674 kg, which is 17% of the 28,200 kg payload — so this load is limited by space, not weight.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing all six orientations, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

400 × 300 × 300 mm boxes in other containers and trucks

Other cargo in a 20ft container

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 1.4 s of search. Real containers vary by manufacturer; measure yours for tight loads.