How many 1 m³ crates (1 × 1 × 1 m) fit in a 12 t truck?
1 m³ crates (1 × 1 × 1 m) of 1,000 × 1,000 × 1,000 mm (also called one cubic metre wooden crates) in a 12-tonne box truck — inner dimensions 7,300 × 2,480 × 2,500 mm. Calculated by the Cubestow engine on 2026-09-08.
Upright, stacked as high as the roof allows. 40% of the space used, 2 layers high, about 5,400 kg (98% of payload). Payload-limited: 28 would fit by space alone. Open this load in the 3D planner →
Top view — floor layer (10 on the floor)
Side view — first row along the wall (2 layers)
The answer in detail
A one-cubic-metre wooden crate at 300 kg is a useful reference unit: the count is simply how many whole metres fit along, across and up — after which the payload limit takes over.
A 7.3 m rigid body with around 5.5 t of payload — the usual size for regional pallet distribution.
The simple grid estimate is 7 along the length × 2 across × 2 high = 28. The engine's validated plan holds 18, below the raw grid because the payload limit cap the load.
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Upright, stacked as high as the roof allows (headline figure) | 18 | 2 | 40% | 5,400 kg (98% of payload) |
How many 12 t trucks for a given order?
| 1 m³ crates (1 × 1 × 1 m) | 10 | 25 | 50 | 100 | 250 | 500 |
|---|---|---|---|---|---|---|
| 12 t trucks needed | 1 | 2 | 3 | 6 | 14 | 28 |
| Last one filled to | 56% | 39% | 78% | 56% | 89% | 78% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many 1 m³ crates (1 × 1 × 1 m) fit in a 12 t truck?
18 1 m³ crates (1 × 1 × 1 m) of 1,000 × 1,000 × 1,000 mm fit in a 12 t truck (inner dimensions 7,300 × 2,480 × 2,500 mm), upright, stacked as high as the roof allows. That uses 40% of the 45.3 m³ available and weighs about 5,400 kg.
What are the inner dimensions of a 12 t truck?
Typical inner dimensions are 7,300 mm long, 2,480 mm wide and 2,500 mm high (287.4 × 97.6 × 98.4 in), giving 45.3 m³ of space and a rated payload of about 5,500 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
Why does the payload limit matter for 1 m³ crates (1 × 1 × 1 m)?
Geometrically 28 1 m³ crates (1 × 1 × 1 m) would fit, but at about 300 kg each the 12 t truck's 5,500 kg payload is reached at 18. Heavy cargo fills the weight allowance before the space.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.