Cubestow
Fit guidesLWB panel van400 × 300 × 200 mm boxes

How many 400 × 300 × 200 mm boxes fit in a LWB panel van?

400 × 300 × 200 mm boxes of 400 × 300 × 200 mm (also called 40 × 30 × 20 cm cartons) in a Long-wheelbase panel van — inner dimensions 3,700 × 1,800 × 1,900 mm. Calculated by the Cubestow engine on 2026-09-08.

300400 × 300 × 200 mm boxes

Boxes may be laid on any side. 57% of the space used, 5 layers high, about 1,200 kg (100% of payload). Payload-limited: 513 would fit by space alone. Open this load in the 3D planner →

300400 × 300 × 200 mm boxes
5layers
57%volume used
65%of the length used
1,200 kgtotal cargo weight
1,200 kgrated payload

Top view — floor layer (72 on the floor)

3,700 mm 1,800 mm door end →
long side along the lengthturned

Side view — first row along the wall (5 layers)

1,900 mm

The answer in detail

A shallow quarter-Euro carton, common for apparel, books and small electronics.

Cargo area of a typical LWB high-roof van (Sprinter / Transit class): 3.7 m long between the bulkhead and the doors, 1.8 m wide at floor level, with wheel arches narrowing the floor to about 1.3 m in the middle — the plan here ignores the arches, so real loads may lose one row.

The simple grid estimate is 9 along the length × 6 across × 5 high = 270. The engine's validated plan holds 300, below the raw grid because the payload limit cap the load.

Weight, not space, is the limit here. By geometry 513 400 × 300 × 200 mm boxes fit, but at about 4 kg each the rated payload of 1,200 kg is reached at 300. Road weight limits on the way to or from the port can be lower still.

Variants

Loading ruleFitsLayersVolume usedTotal weight
Boxes may be laid on any side (headline figure)300557%1,200 kg (100% of payload)
Boxes kept this-side-up (turned on the floor plane only)300957%1,200 kg (100% of payload)

How many LWB panel vans for a given order?

400 × 300 × 200 mm boxes1002505001,0002,5005,000
LWB panel vans needed1124917
Last one filled to33%83%67%33%33%67%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many 400 × 300 × 200 mm boxes fit in a LWB panel van?

300 400 × 300 × 200 mm boxes of 400 × 300 × 200 mm fit in a LWB panel van (inner dimensions 3,700 × 1,800 × 1,900 mm), boxes may be laid on any side. That uses 57% of the 12.7 m³ available and weighs about 1,200 kg.

What are the inner dimensions of a LWB panel van?

Typical inner dimensions are 3,700 mm long, 1,800 mm wide and 1,900 mm high (145.7 × 70.9 × 74.8 in), giving 12.7 m³ of space and a rated payload of about 1,200 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

Why does the payload limit matter for 400 × 300 × 200 mm boxes?

Geometrically 513 400 × 300 × 200 mm boxes would fit, but at about 4 kg each the LWB panel van's 1,200 kg payload is reached at 300. Heavy cargo fills the weight allowance before the space.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing all six orientations, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

400 × 300 × 200 mm boxes in other containers and trucks

Other cargo in a LWB panel van

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 1.4 s of search. Real containers vary by manufacturer; measure yours for tight loads.