Cubestow
Fit guides40ft high cube400 × 300 × 200 mm boxes

How many 400 × 300 × 200 mm boxes fit in a 40ft high cube?

400 × 300 × 200 mm boxes of 400 × 300 × 200 mm (also called 40 × 30 × 20 cm cartons) in a 40-foot high-cube container (40HC) — inner dimensions 12,032 × 2,352 × 2,698 mm. Calculated by the Cubestow engine on 2026-09-08.

2,970400 × 300 × 200 mm boxes

Boxes may be laid on any side. 93% of the space used, 17 layers high, about 11,880 kg (45% of payload). Open this load in the 3D planner →

2,970400 × 300 × 200 mm boxes
17layers
93%volume used
100%of the length used
11,880 kgtotal cargo weight
26,500 kgrated payload

Top view — floor layer (240 on the floor)

12,032 mm 2,352 mm door end →
long side along the lengthturned

Side view — first row along the wall (17 layers)

2,698 mm

The answer in detail

A shallow quarter-Euro carton, common for apparel, books and small electronics.

Same footprint as a 40GP with about 30 cm more height — the workhorse of e-commerce and consumer-goods shipping because the extra layer of cartons is almost free.

The simple grid estimate is 30 along the length × 7 across × 17 high = 3,570. The engine found 2,970 — 240 more than either uniform grid — by mixing orientations so that the leftover strip along the wall is used and by choosing the orientation that gives the most layers. The top view above shows the pattern.

Variants

Loading ruleFitsLayersVolume usedTotal weight
Boxes may be laid on any side (headline figure)2,9701793%11,880 kg (45% of payload)
Boxes kept this-side-up (turned on the floor plane only)2,9901394%11,960 kg (45% of payload)

How many 40ft high cubes for a given order?

400 × 300 × 200 mm boxes1002505001,0002,5005,000
40ft high cubes needed111112
Last one filled to3%8%17%34%84%68%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many 400 × 300 × 200 mm boxes fit in a 40ft high cube?

2,970 400 × 300 × 200 mm boxes of 400 × 300 × 200 mm fit in a 40ft high cube (inner dimensions 12,032 × 2,352 × 2,698 mm), boxes may be laid on any side. That uses 93% of the 76.4 m³ available and weighs about 11,880 kg.

What are the inner dimensions of a 40ft high cube?

Typical inner dimensions are 12,032 mm long, 2,352 mm wide and 2,698 mm high (473.7 × 92.6 × 106.2 in), giving 76.4 m³ of space and a rated payload of about 26,500 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

How much does a full load of 400 × 300 × 200 mm boxes weigh?

2,970 × 4 kg ≈ 11,880 kg, which is 45% of the 26,500 kg payload — so this load is limited by space, not weight.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing all six orientations, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

400 × 300 × 200 mm boxes in other containers and trucks

Other cargo in a 40ft high cube

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 1.4 s of search. Real containers vary by manufacturer; measure yours for tight loads.