Cubestow
Fit guides40ft reefer400 × 300 × 200 mm boxes

How many 400 × 300 × 200 mm boxes fit in a 40ft reefer?

400 × 300 × 200 mm boxes of 400 × 300 × 200 mm (also called 40 × 30 × 20 cm cartons) in a 40-foot high-cube refrigerated container (40RH) — inner dimensions 11,583 × 2,294 × 2,557 mm. Calculated by the Cubestow engine on 2026-09-08.

2,508400 × 300 × 200 mm boxes

Boxes may be laid on any side. 89% of the space used, 6 layers high, about 10,032 kg (35% of payload). Open this load in the 3D planner →

2,508400 × 300 × 200 mm boxes
6layers
89%volume used
98%of the length used
10,032 kgtotal cargo weight
29,000 kgrated payload

Top view — floor layer (418 on the floor)

11,583 mm 2,294 mm door end →
long side along the lengthturned

Side view — first row along the wall (6 layers)

2,557 mm

The answer in detail

A shallow quarter-Euro carton, common for apparel, books and small electronics.

Inner length and width are reduced by the insulation and the machinery. Cargo must not block the airflow along the ceiling or the T-floor.

The simple grid estimate is 28 along the length × 7 across × 6 high = 1,176. The engine found 2,508 — 156 more than either uniform grid — by mixing orientations so that the leftover strip along the wall is used and by choosing the orientation that gives the most layers. The top view above shows the pattern.

Variants

Loading ruleFitsLayersVolume usedTotal weight
Boxes may be laid on any side (headline figure)2,508689%10,032 kg (35% of payload)
Boxes kept this-side-up (turned on the floor plane only)2,4121285%9,648 kg (33% of payload)

How many 40ft reefers for a given order?

400 × 300 × 200 mm boxes1002505001,0002,5005,000
40ft reefers needed111112
Last one filled to4%10%20%40%100%99%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many 400 × 300 × 200 mm boxes fit in a 40ft reefer?

2,508 400 × 300 × 200 mm boxes of 400 × 300 × 200 mm fit in a 40ft reefer (inner dimensions 11,583 × 2,294 × 2,557 mm), boxes may be laid on any side. That uses 89% of the 67.9 m³ available and weighs about 10,032 kg.

What are the inner dimensions of a 40ft reefer?

Typical inner dimensions are 11,583 mm long, 2,294 mm wide and 2,557 mm high (456.0 × 90.3 × 100.7 in), giving 67.9 m³ of space and a rated payload of about 29,000 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

How much does a full load of 400 × 300 × 200 mm boxes weigh?

2,508 × 4 kg ≈ 10,032 kg, which is 35% of the 29,000 kg payload — so this load is limited by space, not weight.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing all six orientations, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

400 × 300 × 200 mm boxes in other containers and trucks

Other cargo in a 40ft reefer

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 1.4 s of search. Real containers vary by manufacturer; measure yours for tight loads.