Cubestow
Fit guidesLWB panel vanBoxed refrigerators

How many boxed refrigerators fit in a LWB panel van?

Boxed refrigerators of 700 × 750 × 1,850 mm (also called fridge-freezers in cartons) in a Long-wheelbase panel van — inner dimensions 3,700 × 1,800 × 1,900 mm. Calculated by the Cubestow engine on 2026-09-08.

10boxed refrigerators

Upright, single layer (not stacked). 77% of the space used, 1 layer high, about 900 kg (75% of payload). Open this load in the 3D planner →

10boxed refrigerators
1layers
77%volume used
95%of the length used
900 kgtotal cargo weight
1,200 kgrated payload

Top view — floor layer (10 on the floor)

3,700 mm 1,800 mm door end →
long side along the lengthturned

Side view — first row along the wall (1 layer)

1,900 mm

The answer in detail

A boxed freestanding fridge-freezer is roughly 700 × 750 × 1,850 mm and 80–100 kg. Manufacturers ship them upright, unstacked, so the answer is a single floor layer — which is why fridges are usually loaded in high cubes with lighter cargo on top of nothing at all.

Cargo area of a typical LWB high-roof van (Sprinter / Transit class): 3.7 m long between the bulkhead and the doors, 1.8 m wide at floor level, with wheel arches narrowing the floor to about 1.3 m in the middle — the plan here ignores the arches, so real loads may lose one row.

The simple grid estimate is 5 along the length × 2 across × 1 high = 10. Here no mixed pattern beats the best uniform grid, so the engine's plan is exactly that grid (10).

Variants

Loading ruleFitsLayersVolume usedTotal weight
Upright, single layer (not stacked) (headline figure)10177%900 kg (75% of payload)

How many LWB panel vans for a given order?

Boxed refrigerators102550100250500
LWB panel vans needed135102550
Last one filled to100%50%100%100%100%100%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many boxed refrigerators fit in a LWB panel van?

10 boxed refrigerators of 700 × 750 × 1,850 mm fit in a LWB panel van (inner dimensions 3,700 × 1,800 × 1,900 mm), upright, single layer (not stacked). That uses 77% of the 12.7 m³ available and weighs about 900 kg.

What are the inner dimensions of a LWB panel van?

Typical inner dimensions are 3,700 mm long, 1,800 mm wide and 1,900 mm high (145.7 × 70.9 × 74.8 in), giving 12.7 m³ of space and a rated payload of about 1,200 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

How much does a full load of boxed refrigerators weigh?

10 × 90 kg ≈ 900 kg, which is 75% of the 1,200 kg payload — so this load is limited by space, not weight.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, no stacking and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

Boxed refrigerators in other containers and trucks

Other cargo in a LWB panel van

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 0.7 s of search. Real containers vary by manufacturer; measure yours for tight loads.