Cubestow
Fit guidesLWB panel vanBanana boxes

How many banana boxes fit in a LWB panel van?

Banana boxes of 500 × 400 × 250 mm (also called fruit trays, produce cartons) in a Long-wheelbase panel van — inner dimensions 3,700 × 1,800 × 1,900 mm. Calculated by the Cubestow engine on 2026-09-08.

63banana boxes

Boxes kept this-side-up (turned on the floor plane only). 25% of the space used, 7 layers high, about 1,197 kg (100% of payload). Payload-limited: 224 would fit by space alone. Open this load in the 3D planner →

63banana boxes
7layers
25%volume used
32%of the length used
1,197 kgtotal cargo weight
1,200 kgrated payload

Top view — floor layer (9 on the floor)

3,700 mm 1,800 mm door end →
long side along the lengthturned

Side view — first row along the wall (7 layers)

1,900 mm

The answer in detail

The standard banana carton is about 500 × 400 × 250 mm and weighs roughly 19 kg loaded (18.14 kg of fruit). Bananas travel palletised in reefers with the boxes always upright; the loose-box count here is the theoretical maximum for the space.

Cargo area of a typical LWB high-roof van (Sprinter / Transit class): 3.7 m long between the bulkhead and the doors, 1.8 m wide at floor level, with wheel arches narrowing the floor to about 1.3 m in the middle — the plan here ignores the arches, so real loads may lose one row.

The simple grid estimate is 7 along the length × 4 across × 7 high = 196. The engine's validated plan holds 63, below the raw grid because the payload limit cap the load.

Weight, not space, is the limit here. By geometry 224 banana boxes fit, but at about 19 kg each the rated payload of 1,200 kg is reached at 63. Road weight limits on the way to or from the port can be lower still.

Variants

Loading ruleFitsLayersVolume usedTotal weight
Boxes kept this-side-up (turned on the floor plane only) (headline figure)63725%1,197 kg (100% of payload)

How many LWB panel vans for a given order?

Banana boxes1002505001,0002,5005,000
LWB panel vans needed248164080
Last one filled to59%97%94%87%68%37%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many banana boxes fit in a LWB panel van?

63 banana boxes of 500 × 400 × 250 mm fit in a LWB panel van (inner dimensions 3,700 × 1,800 × 1,900 mm), boxes kept this-side-up (turned on the floor plane only). That uses 25% of the 12.7 m³ available and weighs about 1,197 kg.

What are the inner dimensions of a LWB panel van?

Typical inner dimensions are 3,700 mm long, 1,800 mm wide and 1,900 mm high (145.7 × 70.9 × 74.8 in), giving 12.7 m³ of space and a rated payload of about 1,200 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

Why does the payload limit matter for banana boxes?

Geometrically 224 banana boxes would fit, but at about 19 kg each the LWB panel van's 1,200 kg payload is reached at 63. Heavy cargo fills the weight allowance before the space.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

Banana boxes in other containers and trucks

Other cargo in a LWB panel van

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 1.4 s of search. Real containers vary by manufacturer; measure yours for tight loads.