How many 580 × 380 × 330 mm master cartons fit in a LWB panel van?
580 × 380 × 330 mm master cartons of 580 × 380 × 330 mm (also called shoe master cartons, footwear shipping cartons) in a Long-wheelbase panel van — inner dimensions 3,700 × 1,800 × 1,900 mm. Calculated by the Cubestow engine on 2026-09-08.
Boxes kept this-side-up (turned on the floor plane only). 63% of the space used, 5 layers high, about 1,199 kg (100% of payload). Payload-limited: 140 would fit by space alone. Open this load in the 3D planner →
Top view — floor layer (24 on the floor)
Side view — first row along the wall (5 layers)
The answer in detail
A typical footwear master carton (12 pairs) is about 580 × 380 × 330 mm, and is shipped upright so the inner boxes are not crushed.
Cargo area of a typical LWB high-roof van (Sprinter / Transit class): 3.7 m long between the bulkhead and the doors, 1.8 m wide at floor level, with wheel arches narrowing the floor to about 1.3 m in the middle — the plan here ignores the arches, so real loads may lose one row.
The simple grid estimate is 6 along the length × 4 across × 5 high = 120, or 9 × 3 × 5 = 135 with every piece turned. The engine's validated plan holds 109, below the raw grid because the payload limit cap the load.
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Boxes kept this-side-up (turned on the floor plane only) (headline figure) | 109 | 5 | 63% | 1,199 kg (100% of payload) |
How many LWB panel vans for a given order?
| 580 × 380 × 330 mm master cartons | 100 | 250 | 500 | 1,000 | 2,500 | 5,000 |
|---|---|---|---|---|---|---|
| LWB panel vans needed | 1 | 3 | 5 | 10 | 23 | 46 |
| Last one filled to | 92% | 29% | 59% | 17% | 94% | 87% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many 580 × 380 × 330 mm master cartons fit in a LWB panel van?
109 580 × 380 × 330 mm master cartons of 580 × 380 × 330 mm fit in a LWB panel van (inner dimensions 3,700 × 1,800 × 1,900 mm), boxes kept this-side-up (turned on the floor plane only). That uses 63% of the 12.7 m³ available and weighs about 1,199 kg.
What are the inner dimensions of a LWB panel van?
Typical inner dimensions are 3,700 mm long, 1,800 mm wide and 1,900 mm high (145.7 × 70.9 × 74.8 in), giving 12.7 m³ of space and a rated payload of about 1,200 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
Why does the payload limit matter for 580 × 380 × 330 mm master cartons?
Geometrically 140 580 × 380 × 330 mm master cartons would fit, but at about 11 kg each the LWB panel van's 1,200 kg payload is reached at 109. Heavy cargo fills the weight allowance before the space.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.