How many Australian pallets fit in a 7.5 t truck?
Australian pallets of 1,165 × 1,165 × 1,000 mm (also called 1165 × 1165 pallets) in a 7.5-tonne box truck — inner dimensions 6,200 × 2,450 × 2,400 mm. Calculated by the Cubestow engine on 2026-09-08.
Single layer, floor-loaded (standard practice). 22% of the space used, 1 layer high, about 2,700 kg (96% of payload). Payload-limited: 10 would fit by space alone. Open this load in the 3D planner →
Top view — floor layer (6 on the floor)
Side view — first row along the wall (1 layer)
The answer in detail
The square 1,165 × 1,165 mm Australian standard pallet was sized for rail wagons, not ISO containers — two across need 2,330 mm of the 2,352 mm inner width, which is why it packs a 20ft so tightly and why some forwarders prefer slip sheets for export.
Typical 7.5 t rigid with a 6.2 m body. Payload is limited to roughly 2.8 t once the body and tail-lift are accounted for, so heavy cargo fills the weight allowance long before the space.
The simple grid estimate is 5 along the length × 2 across × 1 high = 10. The engine's validated plan holds 6, below the raw grid because the payload limit cap the load.
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Single layer, floor-loaded (standard practice) (headline figure) | 6 | 1 | 22% | 2,700 kg (96% of payload) |
| Double-stacked (only if each loaded pallet is at most 1,200 mm tall and rated to carry another) | 6 | 2 | 22% | 2,700 kg (96% of payload) |
How many 7.5 t trucks for a given order?
| Australian pallets | 10 | 20 | 33 | 50 | 100 | 250 |
|---|---|---|---|---|---|---|
| 7.5 t trucks needed | 2 | 4 | 6 | 9 | 17 | 42 |
| Last one filled to | 67% | 33% | 50% | 33% | 67% | 67% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many Australian pallets fit in a 7.5 t truck?
6 Australian pallets of 1,165 × 1,165 × 1,000 mm fit in a 7.5 t truck (inner dimensions 6,200 × 2,450 × 2,400 mm), single layer, floor-loaded (standard practice). That uses 22% of the 36.5 m³ available and weighs about 2,700 kg.
What are the inner dimensions of a 7.5 t truck?
Typical inner dimensions are 6,200 mm long, 2,450 mm wide and 2,400 mm high (244.1 × 96.5 × 94.5 in), giving 36.5 m³ of space and a rated payload of about 2,800 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
Why does the payload limit matter for Australian pallets?
Geometrically 10 Australian pallets would fit, but at about 450 kg each the 7.5 t truck's 2,800 kg payload is reached at 6. Heavy cargo fills the weight allowance before the space.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, no stacking and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.