How many 500 × 400 × 400 mm boxes fit in a 7.5 t truck?
500 × 400 × 400 mm boxes of 500 × 400 × 400 mm (also called 50 × 40 × 40 cm cartons) in a 7.5-tonne box truck — inner dimensions 6,200 × 2,450 × 2,400 mm. Calculated by the Cubestow engine on 2026-09-08.
Boxes may be laid on any side. 56% of the space used, 6 layers high, about 2,794 kg (100% of payload). Payload-limited: 445 would fit by space alone. Open this load in the 3D planner →
Top view — floor layer (44 on the floor)
Side view — first row along the wall (6 layers)
The answer in detail
A large parcel carton just under the 80 L mark, common for household goods and for consolidating smaller cartons.
Typical 7.5 t rigid with a 6.2 m body. Payload is limited to roughly 2.8 t once the body and tail-lift are accounted for, so heavy cargo fills the weight allowance long before the space.
The simple grid estimate is 12 along the length × 6 across × 6 high = 432. The engine's validated plan holds 254, below the raw grid because the payload limit cap the load.
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Boxes may be laid on any side (headline figure) | 254 | 6 | 56% | 2,794 kg (100% of payload) |
| Boxes kept this-side-up (turned on the floor plane only) | 254 | 6 | 56% | 2,794 kg (100% of payload) |
How many 7.5 t trucks for a given order?
| 500 × 400 × 400 mm boxes | 100 | 250 | 500 | 1,000 | 2,500 | 5,000 |
|---|---|---|---|---|---|---|
| 7.5 t trucks needed | 1 | 1 | 2 | 4 | 10 | 20 |
| Last one filled to | 39% | 98% | 97% | 94% | 84% | 69% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many 500 × 400 × 400 mm boxes fit in a 7.5 t truck?
254 500 × 400 × 400 mm boxes of 500 × 400 × 400 mm fit in a 7.5 t truck (inner dimensions 6,200 × 2,450 × 2,400 mm), boxes may be laid on any side. That uses 56% of the 36.5 m³ available and weighs about 2,794 kg.
What are the inner dimensions of a 7.5 t truck?
Typical inner dimensions are 6,200 mm long, 2,450 mm wide and 2,400 mm high (244.1 × 96.5 × 94.5 in), giving 36.5 m³ of space and a rated payload of about 2,800 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
Why does the payload limit matter for 500 × 400 × 400 mm boxes?
Geometrically 445 500 × 400 × 400 mm boxes would fit, but at about 11 kg each the 7.5 t truck's 2,800 kg payload is reached at 254. Heavy cargo fills the weight allowance before the space.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing all six orientations, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.