How many 55-gallon drums fit in a 7.5 t truck?
55-gallon drums of 585 × 585 × 880 mm (also called 200 L drums, 205 L steel drums) in a 7.5-tonne box truck — inner dimensions 6,200 × 2,450 × 2,400 mm. Calculated by the Cubestow engine on 2026-09-08.
Upright, single layer (not stacked). 10% of the space used, 1 layer high, about 2,640 kg (94% of payload). Payload-limited: 40 would fit by space alone. Open this load in the 3D planner →
Top view — floor layer (12 on the floor)
Side view — first row along the wall (1 layer)
The answer in detail
A 55 US gallon / 205-litre steel drum is about 585 mm in diameter and 880 mm tall; filled with a water-like liquid it weighs around 220 kg. Drums are modelled here on their square footprint, standing upright and loose (not palletised, not stacked). Palletised drums load as 48 × 48 in pallets, four per pallet.
Typical 7.5 t rigid with a 6.2 m body. Payload is limited to roughly 2.8 t once the body and tail-lift are accounted for, so heavy cargo fills the weight allowance long before the space.
The simple grid estimate is 10 along the length × 4 across × 1 high = 40. The engine's validated plan holds 12, below the raw grid because the payload limit cap the load.
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Upright, single layer (not stacked) (headline figure) | 12 | 1 | 10% | 2,640 kg (94% of payload) |
| Drums stacked two high (only if the drum, lid and cargo allow it) | 12 | 2 | 10% | 2,640 kg (94% of payload) |
How many 7.5 t trucks for a given order?
| 55-gallon drums | 10 | 25 | 50 | 100 | 250 | 500 |
|---|---|---|---|---|---|---|
| 7.5 t trucks needed | 1 | 3 | 5 | 9 | 21 | 42 |
| Last one filled to | 83% | 8% | 17% | 33% | 83% | 67% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many 55-gallon drums fit in a 7.5 t truck?
12 55-gallon drums of 585 × 585 × 880 mm fit in a 7.5 t truck (inner dimensions 6,200 × 2,450 × 2,400 mm), upright, single layer (not stacked). That uses 10% of the 36.5 m³ available and weighs about 2,640 kg.
What are the inner dimensions of a 7.5 t truck?
Typical inner dimensions are 6,200 mm long, 2,450 mm wide and 2,400 mm high (244.1 × 96.5 × 94.5 in), giving 36.5 m³ of space and a rated payload of about 2,800 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
Why does the payload limit matter for 55-gallon drums?
Geometrically 40 55-gallon drums would fit, but at about 220 kg each the 7.5 t truck's 2,800 kg payload is reached at 12. Heavy cargo fills the weight allowance before the space.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, no stacking and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.