How many Australian pallets fit in a 12 t truck?
Australian pallets of 1,165 × 1,165 × 1,000 mm (also called 1165 × 1165 pallets) in a 12-tonne box truck — inner dimensions 7,300 × 2,480 × 2,500 mm. Calculated by the Cubestow engine on 2026-09-08.
Single layer, floor-loaded (standard practice). 36% of the space used, 1 layer high, about 5,400 kg (98% of payload). Open this load in the 3D planner →
Top view — floor layer (12 on the floor)
Side view — first row along the wall (1 layer)
The answer in detail
The square 1,165 × 1,165 mm Australian standard pallet was sized for rail wagons, not ISO containers — two across need 2,330 mm of the 2,352 mm inner width, which is why it packs a 20ft so tightly and why some forwarders prefer slip sheets for export.
A 7.3 m rigid body with around 5.5 t of payload — the usual size for regional pallet distribution.
The simple grid estimate is 6 along the length × 2 across × 1 high = 12. Here no mixed pattern beats the best uniform grid, so the engine's plan is exactly that grid (12).
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Single layer, floor-loaded (standard practice) (headline figure) | 12 | 1 | 36% | 5,400 kg (98% of payload) |
| Double-stacked (only if each loaded pallet is at most 1,250 mm tall and rated to carry another) | 12 | 2 | 36% | 5,400 kg (98% of payload) |
How many 12 t trucks for a given order?
| Australian pallets | 10 | 20 | 33 | 50 | 100 | 250 |
|---|---|---|---|---|---|---|
| 12 t trucks needed | 1 | 2 | 3 | 5 | 9 | 21 |
| Last one filled to | 83% | 67% | 75% | 17% | 33% | 83% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many Australian pallets fit in a 12 t truck?
12 Australian pallets of 1,165 × 1,165 × 1,000 mm fit in a 12 t truck (inner dimensions 7,300 × 2,480 × 2,500 mm), single layer, floor-loaded (standard practice). That uses 36% of the 45.3 m³ available and weighs about 5,400 kg.
What are the inner dimensions of a 12 t truck?
Typical inner dimensions are 7,300 mm long, 2,480 mm wide and 2,500 mm high (287.4 × 97.6 × 98.4 in), giving 45.3 m³ of space and a rated payload of about 5,500 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
How much does a full load of Australian pallets weigh?
12 × 450 kg ≈ 5,400 kg, which is 98% of the 5,500 kg payload — so this load is limited by space, not weight.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, no stacking and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.