Cubestow
Fit guides40ft reefer55-gallon drums

How many 55-gallon drums fit in a 40ft reefer?

55-gallon drums of 585 × 585 × 880 mm (also called 200 L drums, 205 L steel drums) in a 40-foot high-cube refrigerated container (40RH) — inner dimensions 11,583 × 2,294 × 2,557 mm. Calculated by the Cubestow engine on 2026-09-08.

5755-gallon drums

Upright, single layer (not stacked). 25% of the space used, 1 layer high, about 12,540 kg (43% of payload). Open this load in the 3D planner →

5755-gallon drums
1layers
25%volume used
96%of the length used
12,540 kgtotal cargo weight
29,000 kgrated payload

Top view — floor layer (57 on the floor)

11,583 mm 2,294 mm door end →
long side along the lengthturned

Side view — first row along the wall (1 layer)

2,557 mm

The answer in detail

A 55 US gallon / 205-litre steel drum is about 585 mm in diameter and 880 mm tall; filled with a water-like liquid it weighs around 220 kg. Drums are modelled here on their square footprint, standing upright and loose (not palletised, not stacked). Palletised drums load as 48 × 48 in pallets, four per pallet.

Inner length and width are reduced by the insulation and the machinery. Cargo must not block the airflow along the ceiling or the T-floor.

The simple grid estimate is 19 along the length × 3 across × 1 high = 57. Here no mixed pattern beats the best uniform grid, so the engine's plan is exactly that grid (57).

Variants

Loading ruleFitsLayersVolume usedTotal weight
Upright, single layer (not stacked) (headline figure)57125%12,540 kg (43% of payload)
Drums stacked two high (only if the drum, lid and cargo allow it)114251%25,080 kg (86% of payload)

How many 40ft reefers for a given order?

55-gallon drums102550100250500
40ft reefers needed111259
Last one filled to18%44%88%75%39%77%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many 55-gallon drums fit in a 40ft reefer?

57 55-gallon drums of 585 × 585 × 880 mm fit in a 40ft reefer (inner dimensions 11,583 × 2,294 × 2,557 mm), upright, single layer (not stacked). That uses 25% of the 67.9 m³ available and weighs about 12,540 kg.

What are the inner dimensions of a 40ft reefer?

Typical inner dimensions are 11,583 mm long, 2,294 mm wide and 2,557 mm high (456.0 × 90.3 × 100.7 in), giving 67.9 m³ of space and a rated payload of about 29,000 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

How much does a full load of 55-gallon drums weigh?

57 × 220 kg ≈ 12,540 kg, which is 43% of the 29,000 kg payload — so this load is limited by space, not weight.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, no stacking and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

55-gallon drums in other containers and trucks

Other cargo in a 40ft reefer

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 0.7 s of search. Real containers vary by manufacturer; measure yours for tight loads.