Cubestow
Fit guides12 t truck65-inch TV boxes

How many 65-inch TV boxes fit in a 12 t truck?

65-inch TV boxes of 1,600 × 220 × 1,000 mm (also called 65" television cartons) in a 12-tonne box truck — inner dimensions 7,300 × 2,480 × 2,500 mm. Calculated by the Cubestow engine on 2026-09-08.

9865-inch TV boxes

Upright, stacked at most 2 high. 76% of the space used, 2 layers high, about 3,430 kg (62% of payload). Open this load in the 3D planner →

9865-inch TV boxes
2layers
76%volume used
99%of the length used
3,430 kgtotal cargo weight
5,500 kgrated payload

Top view — floor layer (49 on the floor)

7,300 mm 2,480 mm door end →
long side along the lengthturned

Side view — first row along the wall (2 layers)

2,500 mm

The answer in detail

A 65-inch television carton is about 1,600 × 220 × 1,000 mm and 30–40 kg. TV cartons must stay upright (panel vertical) and are usually stacked at most two high.

A 7.3 m rigid body with around 5.5 t of payload — the usual size for regional pallet distribution.

The simple grid estimate is 4 along the length × 11 across × 2 high = 88. The engine found 98 — 10 more than either uniform grid — by mixing orientations so that the leftover strip along the wall is used and by choosing the orientation that gives the most layers. The top view above shows the pattern.

Variants

Loading ruleFitsLayersVolume usedTotal weight
Upright, stacked at most 2 high (headline figure)98276%3,430 kg (62% of payload)

How many 12 t trucks for a given order?

65-inch TV boxes102550100250500
12 t trucks needed111236
Last one filled to10%26%51%2%55%10%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many 65-inch TV boxes fit in a 12 t truck?

98 65-inch TV boxes of 1,600 × 220 × 1,000 mm fit in a 12 t truck (inner dimensions 7,300 × 2,480 × 2,500 mm), upright, stacked at most 2 high. That uses 76% of the 45.3 m³ available and weighs about 3,430 kg.

What are the inner dimensions of a 12 t truck?

Typical inner dimensions are 7,300 mm long, 2,480 mm wide and 2,500 mm high (287.4 × 97.6 × 98.4 in), giving 45.3 m³ of space and a rated payload of about 5,500 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

How much does a full load of 65-inch TV boxes weigh?

98 × 35 kg ≈ 3,430 kg, which is 62% of the 5,500 kg payload — so this load is limited by space, not weight.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

65-inch TV boxes in other containers and trucks

Other cargo in a 12 t truck

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 0.7 s of search. Real containers vary by manufacturer; measure yours for tight loads.