Cubestow
Fit guides12 t truckWine cases (12 × 750 ml)

How many wine cases (12 × 750 ml) fit in a 12 t truck?

Wine cases (12 × 750 ml) of 330 × 250 × 170 mm (also called 12-bottle wine cartons) in a 12-tonne box truck — inner dimensions 7,300 × 2,480 × 2,500 mm. Calculated by the Cubestow engine on 2026-09-08.

343wine cases (12 × 750 ml)

Boxes kept this-side-up (turned on the floor plane only). 11% of the space used, 14 layers high, about 5,488 kg (100% of payload). Payload-limited: 2,842 would fit by space alone. Open this load in the 3D planner →

343wine cases (12 × 750 ml)
14layers
11%volume used
14%of the length used
5,488 kgtotal cargo weight
5,500 kgrated payload

Top view — floor layer (28 on the floor)

7,300 mm 2,480 mm door end →
long side along the lengthturned

Side view — first row along the wall (14 layers)

2,500 mm

The answer in detail

A 12-bottle case of 750 ml wine, bottles lying down, measures about 330 × 250 × 170 mm and weighs 15–17 kg. Wine ships upright-case-only; the weight adds up quickly — a full 20ft of wine reaches the payload limit before the roof.

A 7.3 m rigid body with around 5.5 t of payload — the usual size for regional pallet distribution.

The simple grid estimate is 22 along the length × 9 across × 14 high = 2,772, or 29 × 7 × 14 = 2,842 with every piece turned. The engine's validated plan holds 343, below the raw grid because the payload limit cap the load.

Weight, not space, is the limit here. By geometry 2,842 wine cases (12 × 750 ml) fit, but at about 16 kg each the rated payload of 5,500 kg is reached at 343. Road weight limits on the way to or from the port can be lower still.

Variants

Loading ruleFitsLayersVolume usedTotal weight
Boxes kept this-side-up (turned on the floor plane only) (headline figure)3431411%5,488 kg (100% of payload)

How many 12 t trucks for a given order?

Wine cases (12 × 750 ml)1002505001,0002,5005,000
12 t trucks needed1123815
Last one filled to29%73%46%92%29%58%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many wine cases (12 × 750 ml) fit in a 12 t truck?

343 wine cases (12 × 750 ml) of 330 × 250 × 170 mm fit in a 12 t truck (inner dimensions 7,300 × 2,480 × 2,500 mm), boxes kept this-side-up (turned on the floor plane only). That uses 11% of the 45.3 m³ available and weighs about 5,488 kg.

What are the inner dimensions of a 12 t truck?

Typical inner dimensions are 7,300 mm long, 2,480 mm wide and 2,500 mm high (287.4 × 97.6 × 98.4 in), giving 45.3 m³ of space and a rated payload of about 5,500 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

Why does the payload limit matter for wine cases (12 × 750 ml)?

Geometrically 2,842 wine cases (12 × 750 ml) would fit, but at about 16 kg each the 12 t truck's 5,500 kg payload is reached at 343. Heavy cargo fills the weight allowance before the space.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, stacking with at least 80% base support and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

Wine cases (12 × 750 ml) in other containers and trucks

Other cargo in a 12 t truck

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 1.4 s of search. Real containers vary by manufacturer; measure yours for tight loads.