How many half pallets fit in a 40ft high cube?
Half pallets of 800 × 600 × 900 mm (also called Düsseldorfer pallets, 800 × 600 pallets, display pallets) in a 40-foot high-cube container (40HC) — inner dimensions 12,032 × 2,352 × 2,698 mm. Calculated by the Cubestow engine on 2026-09-08.
Single layer, floor-loaded (standard practice). 31% of the space used, 1 layer high, about 11,000 kg (42% of payload). Open this load in the 3D planner →
Top view — floor layer (55 on the floor)
Side view — first row along the wall (1 layer)
The answer in detail
The 800 × 600 mm half pallet ("Düsseldorfer") is the retail display pallet. Three fit across a 2,352 mm container with the 600 mm side across (3 × 600 = 1,800 mm), and the plan mixes in turned pallets to use the remaining width.
Same footprint as a 40GP with about 30 cm more height — the workhorse of e-commerce and consumer-goods shipping because the extra layer of cartons is almost free.
The simple grid estimate is 15 along the length × 3 across × 1 high = 45. The engine found 55 — 10 more than either uniform grid — by mixing orientations so that the leftover strip along the wall is used. The top view above shows the pattern.
Variants
| Loading rule | Fits | Layers | Volume used | Total weight |
|---|---|---|---|---|
| Single layer, floor-loaded (standard practice) (headline figure) | 55 | 1 | 31% | 11,000 kg (42% of payload) |
| Double-stacked (only if each loaded pallet is at most 1,349 mm tall and rated to carry another) | 110 | 2 | 62% | 22,000 kg (83% of payload) |
How many 40ft high cubes for a given order?
| Half pallets | 10 | 20 | 33 | 50 | 100 | 250 |
|---|---|---|---|---|---|---|
| 40ft high cubes needed | 1 | 1 | 1 | 1 | 2 | 5 |
| Last one filled to | 18% | 36% | 60% | 91% | 82% | 55% |
Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.
Frequently asked
How many half pallets fit in a 40ft high cube?
55 half pallets of 800 × 600 × 900 mm fit in a 40ft high cube (inner dimensions 12,032 × 2,352 × 2,698 mm), single layer, floor-loaded (standard practice). That uses 31% of the 76.4 m³ available and weighs about 11,000 kg.
What are the inner dimensions of a 40ft high cube?
Typical inner dimensions are 12,032 mm long, 2,352 mm wide and 2,698 mm high (473.7 × 92.6 × 106.2 in), giving 76.4 m³ of space and a rated payload of about 26,500 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.
How much does a full load of half pallets weigh?
55 × 200 kg ≈ 11,000 kg, which is 42% of the 26,500 kg payload — so this load is limited by space, not weight.
How was this number calculated?
By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, no stacking and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.