Cubestow
Fit guides53ft trailer1100 × 1100 mm pallets

How many 1100 × 1100 mm pallets fit in a 53ft trailer?

1100 × 1100 mm pallets of 1,100 × 1,100 × 1,000 mm (also called Asian pallets, JIS pallets, T11 pallets) in a 53-foot dry van trailer (US) — inner dimensions 16,000 × 2,540 × 2,790 mm. Calculated by the Cubestow engine on 2026-09-08.

281100 × 1100 mm pallets

Single layer, floor-loaded (standard practice). 30% of the space used, 1 layer high, about 11,200 kg (55% of payload). Open this load in the 3D planner →

281100 × 1100 mm pallets
1layers
30%volume used
96%of the length used
11,200 kgtotal cargo weight
20,400 kgrated payload

Top view — floor layer (28 on the floor)

16,000 mm 2,540 mm door end →
long side along the lengthturned

Side view — first row along the wall (1 layer)

2,790 mm

The answer in detail

The 1,100 × 1,100 mm square pallet (JIS / T11) is standard in Japan, Korea and much of South-East Asia and fits two across an ISO container with room to spare.

The standard North American dry van. Inner width around 100 in (2,540 mm) fits two 48 × 40 in pallets side by side either way round; legal gross weight, not space, usually caps the load.

The simple grid estimate is 14 along the length × 2 across × 1 high = 28. Here no mixed pattern beats the best uniform grid, so the engine's plan is exactly that grid (28).

Variants

Loading ruleFitsLayersVolume usedTotal weight
Single layer, floor-loaded (standard practice) (headline figure)28130%11,200 kg (55% of payload)
Double-stacked (only if each loaded pallet is at most 1,395 mm tall and rated to carry another)51254%20,400 kg (100% of payload)

How many 53ft trailers for a given order?

1100 × 1100 mm pallets10203350100250
53ft trailers needed112249
Last one filled to36%71%18%79%57%93%

Mixed cargo, different carton sizes or delivery stops? Plan the exact shipment in 3D — free, in the browser, nothing uploaded.

Frequently asked

How many 1100 × 1100 mm pallets fit in a 53ft trailer?

28 1100 × 1100 mm pallets of 1,100 × 1,100 × 1,000 mm fit in a 53ft trailer (inner dimensions 16,000 × 2,540 × 2,790 mm), single layer, floor-loaded (standard practice). That uses 30% of the 113.4 m³ available and weighs about 11,200 kg.

What are the inner dimensions of a 53ft trailer?

Typical inner dimensions are 16,000 mm long, 2,540 mm wide and 2,790 mm high (629.9 × 100.0 × 109.8 in), giving 113.4 m³ of space and a rated payload of about 20,400 kg. Individual units vary by a few centimetres, so check the actual box for tight loads.

How much does a full load of 1100 × 1100 mm pallets weigh?

28 × 400 kg ≈ 11,200 kg, which is 55% of the 20,400 kg payload — so this load is limited by space, not weight.

How was this number calculated?

By running the Cubestow 3D load-planning engine on the exact dimensions above, allowing rotation on the floor plane only, no stacking and the container's payload limit, then re-validating the plan for overlaps, support and weight. Real loads leave room for dunnage, door clearance and uneven cartons, so treat the figure as the practical maximum.

1100 × 1100 mm pallets in other containers and trucks

Other cargo in a 53ft trailer

Assumptions. Cargo is modelled as rigid rectangular boxes with the outer dimensions above; the container's typical inner dimensions and rated payload are used; every box needs at least 80% of its base supported; no dunnage, straps or door clearance are reserved. The plan is one of many optimal or near-optimal arrangements — the engine's plan was checked for overlaps, support, orientation and weight, and the count is what it achieved within 0.7 s of search. Real containers vary by manufacturer; measure yours for tight loads.